Commercial Bathroom Ada Grab Bar Requirements

For single handicapped restrooms there must be a 60 diameter for a wheel chair in the room.

Commercial bathroom ada grab bar requirements.

Grab bars must also have a gripping surface of at least 1 25 mounted at least 1 5 from the wall and be able to withstand a minimum of 250 pounds of pressure. Specific questions call the toll free ada information line at 800 514 0301 voice or 800 514 0383. Each grab bar shall be installed 15 inches 380 mm maximum from the head end wall and 12 inches 305 mm maximum from the control end wall. Vertical grab bar at water closets.

Ada standards for accessible design can be downloaded from www ada. Grab bars must be installed between 34 and 38 inches above the floor and there must be a separation between the grab bar and the wall surface of at least 1 1 2 inches. Two grab bars shall be installed on the back wall one located in accordance with 609 4 and the other located 8 inches 205 mm minimum and 10 inches 255 mm maximum above the rim of the bathtub. Side wall the side wall grab bar shall be 42 inches 1065 mm long minimum located 12 inches 305 mm maximum from the rear wall and extending 54 inches 1370 mm minimum from the rear wall.

Or for answers to. The icc a117 1 standard for accessible and usable buildings and facilities which is referenced by the international building code requires an 18 min. Recessed dispensers are allowed within the 12 305 mm space above and 1 38 mm space below and at the end of a grab bar for ada the recessed dispenser must be flush. Ada grab bars in commercial toilet stalls side wall rear wall side wall the side wall grab bar shall be 42 inches 1065 mm long minimum located 12 inches 305 mm maximum from the rear wall and extending 54 inches 1370 mm minimum from the rear wall.

Ansi allows recessed dispensers at the ends of the grab bar. The ada standards do not require this grab bar but allow a second grab bar to be within the 12 clearance above the horizontal grab bar 609 3 if there is a separation of 1 min. The grab bars are located off the back wall 33 36 from the floor and are 36 width. Grab bars in toilet stall requirements.

Grab bars are not intended to be used as towel bars and vice versa. An ada compliant grab bar handrail must be fully anchored and have a smooth surface that can be easily grabbed. The bar must be 1 1 4 to 1 1 2 inches in diameter. For information about the ada including the revised 2010 ada regulations please visit the department s website www ada gov.

Another grab bar 42 length is also used at 33 36 from the floor off. The dispenser should be 13 inches and 48 inches above the floor and should not be located behind the side grab bar and should be appropriately positioned in an area that complies with the ada standard.